VILLAGIO OWNERS MANUAL
Renegade RV
574.848.1126
Page 92
Rev.712a
This owner’s manual is subject to change
Updates will be posted on our web site
AT WWW. Renegaderv.com
will not disturb your sleep.
Tum the Comfort Adjust dial to the OFF position to disable the Silent
Night Comfort
Adjust feature.
Bed to Sofa
1. Tum the Comfort Adjust dial (located on the Air Bed Control) to the OFF position (to keep the
pump from automatically turning on during storage).
(Air Bed Control Located at head of
mattress)
2. Tum the Inflate/Deflate switch "counter-clockwise" to the DEFLATE position for complete air
removal.
NOTE: Pump will automatically turn off and the Inflate/Deflate switch will automatically return to
the OFF position upon complete deflation.
3. Fold mattress edges back 6 inches and foot end of mattress back 20 inches.
To avoid
mattress damage, fold edges back 6 inches and foot end back 20 inches before returning to
sofa position.
4. Grasp the pull strap and proceed to bring so fall the way up.
5. Reinstall rectangular seat back cushion.
6. Reinstall two front seat back cushions.
For further information s
ee the air bed manufacturer's user guide provided in your Info Case
.
9-7 DINETTE CONVERSION
-(If equipped)
(Typical Villagio - your coach may differ)
Dinette Table Setup
1. Remove dinette table and pedestal leg from forward end of galley.
2. Insert dinette pedestal leg into the metal receiver on the floor.
Your coach may be equipped
with two metal receiver locations:
One located in front the sofa.
The other located behind the
driver and Passenger cab seats.
NOTE: The cab seats must be completely rotated (facing the lounge area) to use as dinette
seating. Refer to the chassis manual provided in your Info ease for complete operating
instructions.
3. Place dinette table securely onto the dinette pedestal leg.
9-8
ROLLER SHADES (MANUAL) -
SOLAR DAY/NIGHT
-(If equipped)
Your coach may feature two-stage day/night
roller shades that provide both solar heat protection and light-blocking capabilities.
The shade
can easily be lowered by hand to any position, then retracted with a slight downward pull
movement. When raising the shade, there is no need to hold onto the bottom of the shade - just
simply let it go and it will rise at a slow, controlled rate.
You can pre-set the auto-stop positioning of your shade, which allows your shade to retract to a
cushioned stop, at the positioning of your choice.
