VILLAGIO OWNERS MANUAL
Renegade RV
574.848.1126
Page 40
Rev.712a
This owner’s manual is subject to change
Updates will be posted on our web site
AT WWW. Renegaderv.com
3-10 VALVE-STEM ACCESS
(
Mercedes-Benz® Sprinter Chassis)
Front Wheel Valve Stem Access on
18-Hole Steel Wheel with Push-On
Full Wheel Trim (
If equipped)
1. Obtain a double angle push/pull truck tire gauge.
2. Locate the 6" hose extension (provided in your Info Case).
3. Push the end of the hose extension onto the front wheel valve stem cap.
4. Using the hose extension as a remote handle, unscrew the valve stem cap (retaining cap in
the end of the hose extension).
5. Adequate clearance is available to insert the tire gauge onto valve stem.
6. When tire pressure testing is complete, reinstall the valve stem cap (with the cap still retained
in the hose extension end).
7. Remove hose extension from valve stem cap.
Rear Inner Dual Valve Stem Access on 18-Hole Steel Wheel with Push On Full Wheel Trim
(I
f equipped)
1. Obtain a double angle push/pull truck tire gauge.
2. Locate the 6" hose extension (provided in your Info Case).
3. Push the end of the hose extension onto the rear inner dual valve stem cap.
4. Using the hose extension as a remote handle, unscrew the valve stem cap (retaining cap in
the end of the hose extension).
NOTE: If the valve stem cap and valve stem