VILLAGIO OWNERS MANUAL
Renegade RV
574.848.1126
Page 91
Rev.712a
This owner’s manual is subject to change
Updates will be posted on our web site
AT WWW. Renegaderv.com
Security Latch
(located on front of sofa)
- Pull OUT to release
Lift the front edge of the sofa seat upward and outward from the wall while gently pushing
downward on the backrest until the cushions lie flat.
The bed is now ready for use.
Bed to Sofa
Push the front edge of the sofa seat toward the wall while lifting upward on the backrest until the
sofa is fully seated against the wall and security latch "clicks" into locked position.
9-3 SOFA/BED CONVERSION
-(If equipped)
Sofa to Bed
Press DOWN on security latch handle (accessible through front sofa opening) to
release sofa seat.
Security Latch Handle
accessible
through front sofa opening Security Latch Handle
- Press DOWN to release.
Lift the front edge of the sofa seat upward and pull outward from the
wall while gently pushing down-ward on the backrest until the cushions lie flat.
The bed is now
ready for use.
Bed to Sofa
Push the front edge of the sofa seat toward the wall while lifting upward on the backrest until the
sofa is fully seated against the wall and security latch "clicks" into locked position.
9-4 COMFORT SOFA SLEEPER
-(If equipped)
(Typical Villagio - your coach may vary according to floor plan)
Your coach may be equipped with a Comfort Sofa Sleeper, which is featured with an air bed
that can be adjusted to the firmness of your choice.
Sofa to Bed
1. Remove seat back cushions and set aside.
2. Remove rectangular seat back cushion and set aside.
3. Using the pull strap (attached to the back side of the sofa), pull the sofa back out and extend
all the way down to the floor.
4. Unfold the air mattress so it is covering the sofa bed.
NOTE: The air mattress is plugged into an AC power outlet behind the sofa.
It may be
necessary to press the "Reset" button on the galley GFCI outlet before operating.
5. Tum the Comfort Adjust dial (located on the Air Bed Control) to desired firmness - push,
Medium, or Firm.
Air Bed Control (Located at head of mattress)
6. Tum the Inflate/Deflate switch "clockwise" to the INFLATE position.
NOTE: Pump will automatically turn off once selected firmness level is reached and the
Inflate/Deflate switch will automatically return to the OFF position.
Silent Night Comfort Adjust
If your air bed pressure drops below the predetermined pressure
level, the Silent Night Comfort Adjust Pump will automatically tum on to re-inflate. The pump
operates silently so that it
