Renault Premium DXi 11, Руководство по обслуживанию, Страница: 70 / 400

B2-28
Presentation
Multi-function information display
Description:
The multi-function information display is di-
vided into 5 distinct zones.
Zone (1)
Zone displaying active function pictograms
and present faults.
When you activate a new function or if a fault
appears on the vehicle, the pictogram symbol-
izing the function or fault is first of all dis-
played in zone (2) for 15 seconds. Then, it is
displayed in zone (1).
Any action on control (AF) is displayed direct-
ly in zone (1).
The function pictograms are aligned starting on the left and the fault pictograms are aligned
starting on the right.
Zone (2)
This is the main information display zone. Here, the different menus are displayed.
When the ignition is switched on:
– If the engine is not started immediately, the oil level is displayed for a few seconds
(see page C-2-2).
– The pictograms connected with the auto-test are displayed for a few seconds (see page
C2-5).
– Once the previously mentioned controls have finished their action, the "supplementary
driving information" menu is displayed.
When you activate a new function or if a fault appears, the pictogram and the related text
are displayed for a moment in this zone, then the active menu before manipulation or
appearance of the fault is displayed again. The pictogram is then displayed in zone (1).
Any action on control (AF) is displayed in zone (1).
When zone (1) is full, the following pictograms are displayed in succession every 3 seconds in
zone (2).