manualshive.com logo in svg

Renault Premium DXi 11, Руководство по обслуживанию, Страница: 217 / 400

Поделиться
Скачать
Renault Premium DXi 11 Скачать руководство пользователя страница 217

D1-15   

 Use of the equipment

IN THE EVENT OF DANGER, IT IS POSSIBLE TO STOP THE MOVEMENT STRAIGHT
AWAY BY PRESSING BUTTON

 (1)

 ONCE.

If the speed of movement is considered too fast by the electronic system, it limits that speed by
cutting the air flow.

Standby

Keep toggle switch  (2) depressed and switch off the ignition.
The suspension will remain in a stabilized position for  1 hour. It is also possible to modify
the suspension height with the raise / lower switch  (4) - (5).

IF YOUR VEHICLE HAS A GROSS TRAIN/COMBINATION WEIGHT (GTW/GCW) OF 60
TONNES, THE PARKING BRAKE ACTS ON THE FRONT AXLE IN ADDITION TO THE
DRIVE AXLE.
DURING SUSPENSION ADJUSTMENT OPERATIONS, THE FRONT AXLE BRAKE IS RE-
LEASED SO AS TO NOT GENERATE ANY MECHANICAL STRESS.
BEFORE ADJUSTING THE SUSPENSION, MAKE SURE THERE IS NO RISK OF THE VEHI-
CLE MOVING.

Содержание Premium DXi 11

















































































































































































































































































































































































































Отзывы:

Нет отзывов