manualshive.com logo in svg

Renault Premium DXi 11, Руководство по обслуживанию, Страница: 55 / 400

Поделиться
Скачать
Renault Premium DXi 11 Скачать руководство пользователя страница 55

B2-13   

 Presentation

Tachograph

To avoid damage to the tachograph, carefully read the manufacturer’s
instruction book supplied with your vehicle’s onboard documents.

If warning pictogram  (G61) is displayed, make sure that:

Analogue tachograph

– the tachograph chart is in place in the tachograph unit.

Digital tachograph

– the driver's tachograph chart  (1) is in place in the tachograph tray.

If this is not the case, make your way to the nearest RENAULT TRUCKS service point or
dealer as quickly as possible to get the repair carried out.

Digital tachograph

To insert and eject the tachograph chart  (1)
into and from the tachograph chart tray, the
vehicle must be at a standstill and the igni-
tion switched on. Upon opening of the tray,
the driving time and rest time information
shown on the multi-function display is auto-
matically zeroed.
Upon insertion of the driver's tachograph
chart, the driving help information previous-
ly recorded on the chart is shown on the
multi-function display after a few minutes.

While the data is being loaded from the driver's chart to the tachograph, it is possible to select
an activity and move away.

Содержание Premium DXi 11

















































































































































































































































































































































































































Отзывы:

Нет отзывов