Renault Premium DXi 11 Скачать руководство пользователя страница 220 | Manualshive

Страница: 220 / 400

Renault Premium DXi 11 Скачать руководство пользователя страница 220

D1-18

Use of the equipment

Memorizing a level

To memorize a level, it must have been previously set using buttons (5) and (6).
Once the required height is reached, select the required memorized setting with button (4),
press button (7) for at least 5 seconds, then release.
The required height is memorized.
To recall this height, just select the corresponding memorized setting with button (4) then
press button (7) for at least 2 seconds, but for less than 5 seconds.

Return to road position

To recall the road position, press button (3).

IN CASE OF DANGER, IT IS POSSIBLE TO IMMEDIATELY STOP A MOVEMENT BY
GIVING A DAB ON BUTTON

(1)

.

If the speed of movement is considered too fast by the electronic system, it limits that speed by
cutting the air flow.

Standby

Keep toggle switch (2) depressed and switch off the ignition.
The suspension will remain in a stabilized position for 1 hour. It is also possible to modify
the suspension height with the raise / lower switch (5) - (6).

«
...
218
219
220
221
222
...
»

Содержание Premium DXi 11

















































































































































































































































































































































































































Отзывы:

Нет отзывов