Renault Premium DXi 11, Руководство по обслуживанию, Страница: 219 / 400

D1-17
Use of the equipment
4x2 - 6x2 vehicle with integral suspension
The remote control serves to raise and lower the front and/or rear suspension and return to
the 'road' position.
It is connected to the ECS electronic box, which provides power supply to the internal elec-
tronics system.
The ECS system does not take account of controls transmitted by the remote control if the
air pressure is more than 8 bars and if the road speed is less than 10 km/h.
Controls available:
– "STOP" control (1).
– "Standby" control (2).
– "Return to road position" control (3).
– Selection control: "drive axle and axle(s)"
/ "memorized heights" (4).
– "Up" control (5).
– "Down" control (6).
– "Memorize" / "Recall memorized setting"
control (7).
Use of the remote control box
Engage the master switch.
Switch on the ignition (if there is insufficient
air pressure, start the engine).
Adjusting the suspension height
Using control (4), select:
– front suspension.
– rear suspension.
– front and rear suspensions.
Without taking action on the selection con-
trol (4), any action on the "raise" (5) and
"lower" (6) controls simultaneously affects
the front and rear suspensions.
"Raise" function
To raise the suspension, press button (5). When
the suspension has reached top abutment, the
system no longer takes the button (5) into account.
"Lower" function
To lower the suspension, press button (6). When the suspension has reached bottom abut-
ment, the system no longer takes the button (6) into account.