Renault Premium DXi 11, Руководство по обслуживанию, Страница: 213 / 400

D1-11
Use of the equipment
4x2 vehicle with adjustable rear suspension
Depending on your vehicle's equipment
Without remote control
Switches (C1 - C2 - C3), located on the dashboard, serve to raise and lower the rear suspen-
sion and return to the road level.
The ECS system only takes account of commands transmitted by the switches if the air pres-
sure is above 8 bars and the road speed is below 10 km/h.
Controls available:
– C1 : "raise / lower" control,
– C2 : "memorize / recall memorized
setting" control,
– C3 : "return to road level / standby"
control.
Use
Engage the master switch.
Switch on the ignition (if the air pressure is too
low, start the engine).
"Raise" feature"
To raise the suspension, move toggle switch
(C1) to position (1). When the suspension
reaches its bottom abutment height, the system
no longer takes account of the switch being moved to position (1).
"Lower" feature"
To lower the suspension, move toggle switch (C1) to position (2). When the suspension
reaches its bottom abutment height, the system no longer takes account of the switch being
moved to position (2).
Memorizing a level
To memorize a level, the suspension must have previously been set to that level by means
of toggle switch (C1).
Once the required height is reached, press toggle switch (C2) for at least 5 seconds, then
release it.
The required height is memorized.
To recall this height, just press toggle switch (C2) for at least 2 seconds, but no longer than
5 seconds.
Return to road level
To recall the road level, move toggle switch (C3) to position (1).