Solar plant
Deactivation if no solar plant is available. It can be activated again at a later date.
Activation if a solar plant is available.
Menu item
Parameter
Factory setting
Solar plant
Deactivated
Deactivated
Activated
Selecting the pump system
Select the pump system for the speed controller. The speed control system is available for a solar cycle with
asynchronous pump (controlled by an A01 with "wave packets"), as well as for one or two solar cycles with
high-efficiency pump (controlled by an A01 with "PWM").
We recommend activating an EC pump. The solar pump adapts automatically to solar capacity. If the tem-
perature difference increases due to increased solar capacity, the speed of the solar pump is increased.
(This results in a higher degree of efficiency of the solar plant as well as lower power consumption of the
solar pump).
Menu item
Parameter
Factory setting
Pump type (solar cycle)
Asynchronous pump
EC pump
Selection according to pump
type installed in the solar cycle
Solar speed control system
Activate the solar speed regulation if you want the solar cycle pump to modulate according to solar capacity.
Activation of the speed control system for the pump in the solar cycle. the pump can be activated according
to demand, for efficiency reasons; as solar radiation increases, the speed of the pump increases.
When using a pump which is not suitable for the speed control system, the system should be deactivated.
(We recommend use of a speed-controlled pump).
Menu item
Parameter
Factory setting
Solar speed control system
Deactivated
Deactivated
Activated
Asynchronous speed control system
Menu item
Parameter
Factory setting
Asynchronous speed control
system
On
Off
Off
83
