REMKO DZ 18 HD Скачать руководство пользователя страница 3

Contents

                                          

Page  

 
Safety Instructions                                         4 

Description of device                                     4 

Provision of air heaters                                 5 

Installation instructions                                  6 

Starting                                                          6 

Unit shut down                                              7 

Fuel pump                                                     7 

Change the pump to a 2 pipe system           8 

Maintenance and service                              8 

Contents                            

Page  

 
Burner adjustment                                         9 

Technical data                                               9 

Exploded view                                             10 

Spare part list                                              11 

Wiring diagram                                            12 

Service and guarantee                                12 

Troubleshooting                                           13 

Maintenance log                                          14 

Automatic oil

 

heater 

REMKO DZ 18 HD 

Make sure to read these instructions carefully before starting/using the unit! 

 

Our guarantee will become void when the unit supplied by us is used and  

installed for inadequate purposes, or maintained incorrectly, etc.,  

or if it is changed without our prior consent. 

Subject to alterations! 

Operating Instructions

 

G

 

Always keep these operating instructions near or on the unit! 

G

 

Содержание DZ 18 HD

















Отзывы: