REMKO ATY 260, Операция и запасные части

Страница: 8 / 32

The transmission of the settings is shown by a symbol in the display.
Button functions
By pressing the ON / OFF button, you can activate or deactivate your
unit. The programmed settings and adjustment values before the unit
was turned off will appear in the display.
ON/OFF Button
ON/OFF ON/OFF

/

B
uttons
The remote control has its own temperature display. If buttons 
/
 are
pressed alternately, the display changes to . The  button can
be used to reduce the desired nominal temperature, the  button can be
used to increase it. This adjustment is only possible in cooling and heating
mode. In automatic mode, the fixed temperature is reduced with the

button from 24 °C by 1 or 2 °C and increased by 1 or 2 °C with button  .
The current setting is shown next to the temperature display.
In dehumidification mode, no temperature adjustment can be made.
Automatic mode
 ...  ... 
Cooling / heating
mode
  
MODE B utton
Use the MODE button to select between the individual operating modes.
5 modes are available:
1. Automatic automatic selection of cooling or heating operation
2. Cooling predominantly summer operating mode
3. Heating predominantly winter operating mode
4. Air circulation only for air circulation
5. Dehumidification Summer or winter operating mode
MODE
Automatic Cooling Heating Air circulation Dehumidification
MODE MODE MODE MODE
REMKO ATY
8