REMKO ATY 260, Операция и запасные части

Страница: 7 / 32

„ “ (SWING) button
This button directly activates
the oscillating function of the
fins for better air distribution in
the room.
„TIMER“ button
With this button, the automatic
turn on or turn off time of
the unit is activated and
programmed with buttons
and at intervals of 10
minutes.
„  “ button
This button increases the
value for time and timer
programming.
„  “ button
This button reduces the
value for time and timer
programming.
„SET“
button
Pressing this button activates
the previously set timer.
„OFF “ button
When this button is pressed, a
shut off timer of 1/2, 1, 2 or 5
hours is activated.
„TURBO“ button
By pressing this button, the
maximum fan stage is activated
for 30 minutes.
„CLOCK“ button
By pressing this button, the
time setting is activated.
„DISP“ button
By pressing this button, the
current temperature on the
remote control is transmitted to
the unit in the I-Feel function.
„ION“ button
By pressing this button, the ion
generator is turned on.
2. Cooling mode
In this mode, the cold air in the
room is cooled down to the
desired temperature.
3. Heating mode
In this mode, the warm air in
the room is warmed up to the
desired temperature.
4. Air circulation mode
In this mode, the air in the room
is recirculated.
5. Dehumidification mode
In this mode, the room is mainly
dehumidified, the adjusted
temperature is retained.
„FAN“
button
With this button, the desired
fan speed can be set. 4 stages
are available: Automatic, high,
medium and low fan stage.
„I FEEL“ button
With this button, the sensing of
the room temperature is moved
from the interior unit to the
remote control.
The temperature measured
on the remote control is then
transmitted to the interior unit
in certain intervals.
„ “ (SLEEP) button
After pressing this button, the
Sleep mode is activated and
in cooling operation, the
nominal temperature increases
automatically by 1 °C within an
hour, in heating operation, the
nominal temperature is lowered
by 1 °C within an hour.
After
the 2. hour, the temperature
increases / decreases by 2°C.
After 6 hours, the function is
turned off.
Buttons of remote control
B
uttons of remote control
„ON/OFF“ button
Press this button to operate the
unit.
„  “ button
With this button, the desired
temperature can be decreased
up to 16 °C.
„  “
button
With this button, the desired
temperature can be increased
up to 30 °C.
„MODE“ button
With this button, the operating
mode is selected. The interior
unit has 5 modes:
1. Automatic mode
In this mode, the unit works in
cooling or in heating mode.
7