4
REMKO ATK
Safety notes
Always observe the respective local building code and fire prevention
guidelines as well as the guidelines of the accident prevention and
insurance associations when using the equipment.
Disposing of packaging
When disposing of packaging
material, please consider our
environment.
Our units are carefully packed
and delivered in stable transport
packaging and, if applicable, on a
wooden pallet.
The packaging materials are
environmentally friendly and can
be recycled.
By recycling packaging materials,
you make a valuable contribution
to the reduction of waste and
conservation of raw materials.
Therefore, only dispose of
packaging material at appropriate
collection points.
Disposal of the old unit
The manufacturing process for
the units is subject to continuous
quality control.
Only high-grade materials are
processed, the majority of which
are recyclable.
You also contribute to
environmental protection by
ensuring that your old equipment
is only disposed of in an
environmentally-friendly manner.
Therefore, only take the old
unit to an authorised recycling
business or to an appropriate
collection point.
The units have been subjected
to extensive material, functional
and quality inspections prior to
delivery. However, dangers can
arise from the units if they are used
improperly or not as intended by
untrained personnel!
The following notes must be
observed in full
:
■
The power plug must be pulled
out of the mains socket before
maintenance and repair work
■
The units may only be operated
by persons that have been
instructed in their operation
■
The units must be installed and
operated in such a way that
personnel are not endangered
by exhaust and radiant heat
and that no fires may occur
■
The units must then only
be operated in areas where
the units can be supplied with
an adequate amount of air for
combustion
■
Without exhaust routing,
the units may only be operated
in well ventilated spaces.
Personnel must not remain in
the installation area.
Appropriate prohibition
signs must be erected at
the entrances!
■
Set the units down on a
level and non-combustible
base
■
The units may not be installed
or operated in potentially
flammable or explosive
environments
■
The units must not be installed
or operated in atmospheres
containing oil, sulphur or salt
■
A safety zone of 1.5 m must be
maintained around the units,
incl. to non-combustible items
■
The protective grid of the
intake must always be kept free
of dirt and loose objects
■
Never insert foreign objects into
the unit
■
The units must not be exposed
to direct jets of water e.g.
pressure washers, etc.
■
All electrical cables for the
units must be protected against
damage (e.g. by animals etc.)
■
Safety devices must not be
bypassed or disabled
■
According to its design,
permanent, fixed unit
installation is not intended for
this unit type
Environmental
protection and
recycling
Содержание ATK 50-S
Страница 2: ......