REMET CNC RT-690R, Техническая документация инструкция

Страница: 9 / 29

REMET CNC TECHNOLOGY SP. Z O.O.
Page 9 of 28
Producer of machinery and equipment, machining
Aggregated with a tractor
1. Observe the recommended minimum front load of the tractor in order to
maintain stability.
2. Należy Be especially careful when coupling the shredder with the tractor and
during its disconnection.
3. Every time before starting work, all the safety switches and the hydraulic
system must be checked for correct operation.
4. It is strictly forbidden to stay between the chipper and the tractor and in the
short distance while operating the lever to operate the hydraulic system.
5. It is forbidden to stay anyone between the tractor and the chipper during
work.
6. Only use PTO shaft with cover and clutch. Work with a shaft without a cover
or with a damaged cover is categorically defended.
7. The shaft guard must be secured against rotation, eg with a chain-link.
8. Work without WPM guards (power take-off shaft in the machine) and PTO
shaft (power take off shaft on the tractor) is prohibited.
9. The power transmission shaft must be of sufficient length.