REMET CNC RT-690R, Техническая документация инструкция

Страница: 18 / 29

REMET CNC TECHNOLOGY SP. Z O.O.
Page 18 of 28
Producer of machinery and equipment, machining
8. It is forbidden using the device while the tractor is moving.
9. It is forbidden making any changes or modifications to the device, making
changes or modifications results in immediate loss of the warranty. In addition,
the manufacturer is not liable for resulting damage to property and personal injury,
death of the operator) resulting from changes or modifications to the device.
Notes and first aid
1. Report any accident at work to your supervisor, leave the work station in the
condition in which the accident occurred.
2. Always be prepared. Obtain the following instructions in:
•
A fully-equipped first aid kit easily accessible by the operator and bystan-
ders. The first aid kit should contain an appropriate amount of dressing for
cuts and cut wounds.
•
Clean towels and cloths to stop bleeding.
•
A mobile phone or other device that allows you to quickly call for help.
3. Do not work alone! There should be a person who knows the rules of first aid.
The midfielder must be at a safe distance from the work area, but he should
always pay attention to the operator. Use the device only in places where you
can quickly call an ambulance! If injury occurs first aid should be given and
further medical help should be obtained if necessary
7. TRANSPORT AND STORAGE OF THE APPLIANCE
The device should be transported after coupling with the tractor, or on a
suitable platform of this type, before loading or transporting, the loading funnel
should be folded and secured. Never allow anyone to sit or stand on the ma-
chine.
The device should be stored out of the reach of children in a dry place at
0ºC to + 40ºC.
Before storing, follow the following procedure:
1. Remove all residual material from the machine.
2. Thoroughly wash the machine with pressurized water to remove any dirt,
sludge or sand.
3. Check all rotating parts, remove any tangled material if necessary.
4. Start the machine for a few minutes to dry the machine from inside.
5. Lift and lock the hopper.
6. Make paint adjustments to scratches and nicks to protect against corro-
sion.