REMET CNC RT-690R, Техническая документация инструкция

Страница: 17 / 29

REMET CNC TECHNOLOGY SP. Z O.O.
Page 17 of 28
Producer of machinery and equipment, machining
First start:
Despite the lack of working restrictions for the first start of the wood chopper, the
following checks are recommended:
1. After working 1 hour:
•
Check tighten of all bolts and hydraulic system connector,
•
Check the condition of the rotor bearings,
•
Check the condition of the saw blade and cutting blades. If necessary,
adjust or replace it.
•
Lubricate all calendars.
•
Check the operation of the shutdown system and emergency rollback.
2. After working every next 10 hours:
•
Repeat the above steps.
6. PROHIBITED ACTIONS
1. It is forbidden work with a chipper after drinking alcohol or intoxicants and
psychotropic substances (drugs) and drugs that reduce the ability to react.
2. It is forbidden use of the chipper by:
•
Unauthorized persons, untrained, not familiar with the operating instruc-
tions,
•
Children (below the minimum age of the operator determined by local re-
gulations)
•
Pregnent women ,
•
People with limited mental abilities.
3. It is forbidden starting work with a chipper without checking the technical
condition of the device.
4. Operators it is forbidden moving away from the chipper without first
switching off the tractor engine and removing the key from the ignition switch or
disconnecting the power supply.
5. It is forbidden make any adjustments to the chipper or perform repairs
while the wood chipper is coupled with the tractor.
6. It is forbidden using the machine with removed or damaged safety devi-
ces, such as covers and covers, pouring and ejection funnels and with missing
warning stickers.
7. It is forbidden use the device for purposes other than those for which it is
intended.