REMET CNC RT-690R, Техническая документация инструкция

Страница: 15 / 29

REMET CNC TECHNOLOGY SP. Z O.O.
Page 15 of 28
Producer of machinery and equipment, machining
7. Operators performing work with chipper should constantly observe the work
area, and immediately stop work in the event of appearance of outsiders or animals
in the working area of machines.
8. Before inserting the material to be cut into the inlet hopper, pay attention
to whether the material contains foreign elements harder than wood such as: sto-
nes, wires, ropes, nails, rivets, chains, etc., which can damage the knives, cutting
mechanism or entire machine what consequently, it can lead to a dangerous acci-
dent that endangers the life and he-alth of the operator and other third parties.
9. In the event of blocking the chipper cutting mechanism, stop the engine of
the tractor driving the chipper immediately.
10. In the case of hooking the clothes of the operator with the branches and
pulling it in the direction of the inlet of the chipper feeder, the tractor operator
must imme-diately stop the tractor from working.
11. To protect against accidental switching on the tractor driving the chipper,
remove the key from the ignition or disconnect the battery by removing the clamp
from the clamp.
12. The drive of the wood chopper must be switched off during each interruption
13. When the cutting system is working even for a certain period of time after
transporting, moving and lifting is forbidden.
14. To avoid jams, one should alternately insert limp and thin material with lar-
ger branches.
15. Turn off the device when all material has passed through the shredder. In
the opposite case, the device may jam.
16. During operation, keep a safe distance from the machine because long bran-
ches can be thrown out during the retraction.
Activities after finishing work.
1.
After switching off the drive, wait a short while because the rotating parts
of the mechanism are still working for some time after switching off the drive.
2. Make sure that the machine is able to stop completely and then perform
activities related to the cleaning and maintenance of the ma-chine.
3. Set the machine down and secure it in a parking spot.
4. Inspection of technical condition, adjustment and execution of immediate
repairs and maintenance works as well as cleaning of parts and work units can be
carried out only when the chipper has the drive turned off.