Reloop RMP-3, Инструкция по эксплуатации

Страница: 24 / 28

ENGLISH
50
2. Applying the Database Builder
In order to apply the Database Builder and to ana-
lyze your USB data carrier proceed as follows:
Start the installed program. In the first step se -
lect the desired USB data carrier and then click
on „Build“.
Your USB data carrier will now be analyzed.
After a successful analysis you can close the pro -
gram. Your USB data carrier has now been suc-
cessfully analyzed and is ready for application
with the RMP-3.
NOTE! If the Database Builder causes problems
under Windows Vista, please refer to the fol
-
lowing trouble shooting.
Under Windows Vista it is not possible to carry
out the Database Builder. This can be caused by
UAC limitation.
Click on the right mouse button in order to carry
out the Database Builder with the option „Run as
administrator“.
As next step click on „Allow“ in order to carry out
the Database Builder.
IM_RMP3_GB.indd 50 03.11.2009 09:18:43