DE
UT
S
CH
8
E
ngli
SH
OPERaTiOn ManUal
For your own safety, please read this operation manual carefully before initial operation! all per-
sons involved in the installation, setting-up, operation, maintenance and service of this device
must be appropriately qualified and observe this operation manual in detail. This product complies
with the requirements of the applicable European and national regulations. Conformity has been
proven. The respective statements and documents are deposited at the manufacturer.
Congratulations on purchasing your Reloop 10tion Interface. Thank you for placing your trust in our
disc jockey technology. Before operating this equipment we ask you to carefully study and observe
all instructions. Please remove the 10tion Interface from its packaging. Check before initial opera-
tion to make sure that the device has not been visibly damaged during transport. If you detect any
damage to the power cable or the casing, do not operate the device. Contact your specialised dealer.
SaFETY inSTRUCTiOnS
CaUTiOn!
Please exercise particular caution when handling 240 V power voltage. This voltage rating may
lead to a critical electrical shock! any damage caused by the non-observance of this operation
manual excludes any warranty claims. The manufacturer is not liable for any damage to property
or for personal injury caused by improper handling or non-observance of the safety instructions.
- This device left the factory in perfect condition. To maintain this condition and to ensure a risk-
free operation the user must observe the safety instructions and warnings contained in this ope-
ration manual.
- Forreasonsofsafetyandcertification(CE)theunauthorisedconversionand/ormodificationof
thedeviceisprohibited.Pleasenotethatintheeventofdamagecausedbythemanualmodifica
-
tion to this device any warranty claims are excluded.
- The inside of the device does not contain any parts which require maintenance, with the excepti-
onofwearpartsthatcanbeexchangedfromtheoutside.Qualifiedstaffmustcarryoutmainte
-
nance, otherwise the warranty does not apply!
- The Fuse must exclusively be exchanged against fuses of the same class, with the same trigger
features and nominal current rating.
- Ensure that the power will only be supplied after the device has been fully set up. Always plug in
the mains plug last. Ensure that the mains switch is in the “OFF” position when connecting the
device to power.
- Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and
correctly hooked up. Refer to your dealer if you have any questions.
- Ensure that when setting up the product the mains cable is not squashed or damaged by sharp
edges.
- Prevent the mains cable from coming into contact with other cables! Exercise great care when
handling mains cables and connections. Never touch these parts with wet hands!
- Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to
beusedisasupplyoutletinaccordancewithspecificationsofthepublicsupplynetwork.
- Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to hold
the mains plug by the body. Never pull the mains cord!
- Positionthedeviceonahorizontalandstablelow-flamebase.
- Avoid any concussions or violent impact when installing or operating the device.
- When selecting the location of installation make sure that the device is not exposed to excessive
heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your own
safety and that of others!
- Donotrestanycontainersfilledwithliquidthatcouldeasilyspillontothedeviceorinitsimme
-
diatevicinity.If,however,fluidsshouldaccesstheinsideofthedevice,immediatelydisconnect
themainsplug.Havethedevicecheckedbyaqualifiedservicetechnicianbeforere-use.Damage
causedbyfluidsinsidethedeviceisexcludedfromthewarranty.
- Donotoperatethedeviceunderextremelyhot(inexcessof35°C)orextremelycold(below5°
C) conditions. Keep the device away from direct exposure to the sun and heat sources such as
radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or
vents.Alwaysensuresufficientventilation.
- The device must not be operated after being taken from a cold environment into a warm environ-
ment. The condensation caused hereby may destroy your device. Do not switch on or operate the
device until it has reached ambient temperature!
