Printed in the Federal Republic of Germany
TR-Electronic GmbH 2012, All Rights Reserved
05/30/2018
TR - ECE - BA - GB - 0095 - 19
Page 25 of 56
4.5 Incremental interface / SIN/COS interface
Series 88: optional feature
In addition to the PROFINET IO interface for output of the absolute position, the
measuring system in the standard version also has an incremental interface.
However, this can alternatively also be designed as a SIN/COS interface.
This additional interface is not evaluated in relation to safety and must
not be used for safety-oriented purposes!
The measuring system checks the outputs of this interface for the feed-
in of external voltages. In the event of voltages > 5.7 V, the measuring
system is switched off for safety reasons. In this state the measuring
system behaves as if it were not connected.
The interface is generally used as position feedback for motor control
applications.
Danger of damage to subsequent electronics due to overvoltages caused
by a missing ground reference point!
•
If the ground reference point is completely missing, e.g. 0 V of the power
supply not connected, voltages equal to the supply voltage can occur at
the outputs of this interface.
It must be guaranteed that a ground reference point is present at all
times,
or corresponding protective measures by the system operator must be
provided for subsequent electronics.
The signal characteristics of the two possible interfaces are shown below.
