REICH 527-0541, Руководство по установке

Страница: 44 / 68

44
+
Forward Backward
Curve drive:
Rotation
(pushing 2 buttons simultaneously) :
The integrated "Soft-Start" gives an acoustic sig-
nal when starting to move which is meant as a
warning signal of a caravan or trailer starting to
move.
The movement buttons have to be pressed re-
spectively one by one. The arrows by the buttons
show the respective direction of motion.
Always all 4 wheels are driven (real all-wheel
drive = 4WD).
If the movements do not correspond to the sym-
bols on the remote control, the cable connections
of the right and the left drive units need and the
motors to be checked and - if necessary - ex-
changed (see wiring diagram
l ).
It is important that in such a case you turn the
isolating switch off and disconnect the E-boxes
from the electricity supply.
Make sure that you never exchange
the Positive (+) and Negative (-) of
the electricity supply.
Turn off the MoveControl by pushing the
I/O button once at the remote control. The
red LED will turn OFF.
Clockwise rotation
(forward-backward)
Anti clockwise rotation
(forward-backward)
+
+
When the shunting process is finished, the driving
rollers are removed from the tyres by simultane-
ously pressing the two arrow keys pointing back-
wards:
B10 Automatic removal of the
driving rollers (with optional Motor-
Drive):
In final position, the MotorDrive will be switched-
off automatically and the red mark should not be
visible any longer.
B11 Turn OFF MoveControl
Before you release the friction roll-
ers, please ensure that your brake
is engaged to prevent your caravan
rolling away!
Pull on the handbrake and/or secure your caravan
or trailer against rolling away with the help of
chocks.
Turn OFF the isolation switch.
The drive units must not be left connected to the
tyres for long periods of time, as this can result in
damage to the tyres. Movement with a motor
vehicle while the drive units are connected is not
allowed, as the caravan or trailer as well as the
motor vehicle can be damaged.
For the removal disconnect the drive units in
reverse order as described.
Ensure that the friction rollers of both axles are
completely driven back and the red marking can
be seen no more
7
(= OFF).
B8 Direction keys: B9 Manual disengaging of the
friction rollers (without MotorDrive):
The patented control turns the
caravan to the desired direction
with automatic control of all 4
wheels.
4@.$UXJO@.#" 4@.$UXJO@.#"