│
16
REGULUS - STDC E Controller - www.regulus.eu
E 4 - Menu sequence and menu structure
The graphics or overview mode appears when no key
has been pressed for 2 minutes, or when the main
menu is exited by pressing
„esc“
.
Pressing any key
(4)
in graphics or overview mode
takes you directly to the main menu.
The following menu items are then available for
selection there:
1.
Current temperature values with explanations
2.
Function control of the system with operating hours etc.
3.
Select graphics mode or overview mode
4.
Automatic mode, manual mode or switch unit off
5.
Set parameters needed for normal operation
6.
Solar and frost protection, recooling
7.
Commissioning help, program selection, sensor
calibration, clock etc.
8.
Lock against unintentional setting changes
9.
For diagnosis in the event of an error
10.
Language selection
1. Measurements
5. Settings
2. Statistics
6. Protections
4. Operating mode
8. Menu lock
10. Language
3. Display mode
7. Special functions
9. Service values
