70 |
Regency
®
E18E-11 Gas Fireplace Insert
installation
919-203a
07/10/20
1
E18
ENAMEL PANEL INSTALLATION
1. Centre back panel on the back wall of the firebox.
2. Slide in side panel into place in lower track.
3. Secure panel in position with the two clips provided.
4. Repeat steps 2 & 3 on other side.
Panel Clips
Final Install
Black Enamel Panels
• Black Enamel panels must be inspected for scratches and dimples prior to installation. All claims to be recorded at this time.
Claims for damage after installation will not receive consideration.
• Black Enamel panels will discolor a little during normal operation. This is normal and should not be considered a defect.
*
All hand and finger marks
MUST
be cleaned off with a soft cloth. Use an ammonia based cleaner (ie. glass cleaner) to remove any finger
-
prints before applying heat to the unit.
Failure to do this will result in burn stains on panels which you will be unable to remove.
Not protected by product warranty.
ENAMEL PANEL INSTALLATION
Содержание Energy E18E
Страница 102: ...102 Regency E18E 11 Gas Fireplace Insert warranty ...
Страница 103: ...Regency E18E 11 Gas Fireplace Insert 103 ...