Regency City CV72E-LP11, Инструкция для владельца и по установке

Страница: 34 / 108

34
|
City Series CV72E
installation
Framing Dimensions
NOTE: Framing may be constructed of combustible material (ie. 2 x 4)and does not require steel studs.
Framing
Dimensions
Description CV72E
A Framing Height 51" (1295mm)
B Framing Width 78" (1981mm)
C Framing Depth 20-5/8" (524mm)
D Minimum Height to Combustibles 87"(2210mm)
E Corner Wall Depth 82-1/8" (2086mm)
F Corner Facing Wall Width 116-3/16" (2951mm)
G Vent Centerline Height 55-1/4" (1403mm)
I Gas Connection Opening Height 2" (51mm)
J Gas Connection Height 3-7/8" (98mm)
K* Gas Connection Inset-Centre Opening 36-1/4" (921mm)
L Gas Connection Opening Width 5" (127mm)
* See next page for alternate Gas/ Electrical connection options
Note: A combined minimum
of 288 square inches of open
area is required for the con-
vection air outlet to cool the
enclosure. Ensure clearances
for Convection Air Outlets
are met.
See clearances CV72E in this
manual as there are different
methods as to how this can
be achieved.
Note: This appliance must be
installed on a solid surface
such as a plywood floor
which must be the full width
and depth of the appliance.
With the lift handles adding approximately 4 inches to the overall width of the appliance,In cases where the appliance would need to be raised off the ground
in order to slide it into the framed opening, it is suggested that either the framing width change from 78" to 82" so that the appliance could be easily slid into
position with the handles remaining on the appliance, or alternatively create a platform in front of the framed opening where the lift handles could be removed
prior to sliding the appliance into its final position. Alternatively, If raised off the ground, the framing could be installed afterwards once appliance has been
put into place and lift handles removed in order to keep the framing width at 78". Ensure that the wood base that the appliance will sit on is strong enough
to support the full weight of this appliance. The overall weight of this appliance is 529 pounds (shipping weight).
Note: Wood studs in back
can be either wood 2'' x 4''
or 2'' x 6''.