Regency Fireplace Products 686-927, Инструкция для владельца и по установке

Страница: 35 / 128

City Series CB60EPV
|
35
installation
Framing Dimensions - Bay Install
NOTE: Framing may be constructed of combustible material and does not require steel studs.
Framing Dimensions Description CB60EPV
A Framing Height 44-3/4" (1137 mm)
B Framing Width 71-1/4" (1810 mm)
C* Framing Depth 20-5/16" (516 mm)
D Minimum Height to Combustibles 81-1/4" (2038 mm)
G*** Vent Centerline Height 58-3/16" (1478 mm)
** Gas Connection Opening Height See gas connection location in this manual
** Gas Connection Height See gas connection location in this manual
** Gas Connection Inset-Centre Opening See gas connection location in this manual
** See manual for alternate Gas/ Electrical connection options
*** Important: Minimum overall vent run must be 4 feet. Even though centerline is 58 3/16" when
appliance is framed at minimum depth, the 4 feet of vent run cannot be obtained. Increase the centerline height to achieve
a minimum vent run of 4 feet.
Note: A combined minimum
of 180 square inches of open
area is required for the con-
vection air outlet to cool the
enclosure. Ensure clearances
for Convection Air Outlets
are met.
See clearances CB60EPV in
this manual as there are dif-
ferent methods as to how this
can be achieved.
Note: This appliance must be
installed on a solid surface
such as a plywood floor
which must be the full width
and depth of the appliance.
Ensure that the wood base that the appliance will sit on is strong enough to support the full weight of this appliance.
The overall weight of this appliance is 480 pounds (shipping weight).
Note: Unit must be installed onto a solid
backwall - do not install directly onto studs.
*C
Note: The framing depth does not take into
account drywall/wood or similar materials
against the back wall. The framing depth will
need to change based on the thickness of the
material (example: 20-5/16 framing depth +
1/2 drywall = 20 13/16")
Max 2 x 6
Max 2 x 6
*