REENTEL Cabking-6v3, Инструкция по эксплуатации

Страница: 7 / 16

7
12. Make sure the power switch on the motor is in the off position. Connect the motor
power cord to a surge protected outlet or preferably a GFCI (Ground Fault Circuit
Interrupter) outlet. While not necessary, a GFCI is recommended to prevent elec-
tric shock and can be purchased at your local hardware store. Though the motor is
sealed, you must make sure to keep all electrical connections dry.
13. Twist the water flow knobs on the right and left hoods to the
off position according to the directions on the knobs (FIG. G).
Also, swing out the clear splash guards on the hoods so they
are not in contact with the wheels of either wheel assembly.
You can readjust the guards to reduce the splash after turn-
ing on the machine.
14. Next attach the water pump to a surge protected power outlet. The pump has no
on/off switch so once you connect it to the power supply it will start working. After
following the next step you can adjust the water flow rate using the control knobs to
the desired level. Avoid touching the pump in the water bucket with the power on.
NEVER UNPLUG OR TOUCH THE POWER CORDS WITH WET HANDS.
15. You can turn the power on the machine. The wheels spin at 1800RPM, so do not
wear loose clothing or anything that may accidentally get entangled with the
wheels. It is typical for the motor to produce a winding sound when starting up and
a mild humming sound after. On some occasions the motor may make a high pitch
sound. This is most likely caused by the space between the unit and the table sur-
face. You can try to reduce the sound by putting cloth or cardboard under the unit.
16. Now you can start the water drip by adjusting the water knobs, see FIG. G. Our
unique system allows you to drip water on each wheel individually. When grinding
you want to make sure there is enough water dripping so that the wheels do not be-
come dry. In order to use the side spray for the canvas pad or diamond disc, you
will need to turn the knob located on the opposite side of the hood closest to the
motor see FIG. H.
17.
Congratulations!
You are now ready to begin using the CabKing-6V3.
We recommend reading the rest of this manual, especially the safety instructions.
FINAL ASSEMBLY
FIG. G