REENTEL Cabking-6v3, Инструкция по эксплуатации

Страница: 14 / 16

14
TROUBLESHOOTING
PROBLEM RECOMMENDED SOLUTION
PARTS MISSING OR DAMAGED CONTACT YOUR DEALER FOR REPLACEMENTS
MOTOR VIBRATES OR SHAKES
MAKE SURE THE WHEELS ARE PROPERLY BALANCED. SOMETIMES IN
SHIPPING THE WHEELS WILL BECOME UNBALANCED. THIS CAN BE FIXED
BY TAKING THE WHEELS OFF AND REALIGNING THEM. MAKE SURE TO
TIGHTEN THE SHAFT PROPERLY.
WHEELS DON'T TURN
MAKE SURE POWER IS CONNECTED AND MACHINE IS TURNED TO THE
ON POSITION
MAKE SURE THE WHEELS ARE NOT OBSTRUCTED. IF THE WHEELS ARE
CAUGHT ON SOMETHING BEFORE YOU TURN ON THE MOTOR, THERE
WILL NOT BE ENOUGH MOMENTUM TO START SPINNING.
WATER FLOW IS WEAK OR DOESN’T FLOW
AT ALL
CHECK IF THERE IS WATER IN THE BUCKET WITH PUMP
CHECK IF PUMP IS CONNECTED TO POWER SUPPLY
CHECK ALL TUBING IS CONNECTED PROPERLY
CLEAN NOZZLES AND Y--SPLITS WITH PIPE CLEANER OR SMALL BRUSH.
DRIP PANS DO NOT DRAIN
SHAKE THE DRIP PAN TUBING. WATER SHOULD BE FLOWING OUT OF
THE DRIP PAN TUBES, IF NOT THEN SHAKE THE TUBES TO START THE
FLOW WHILE TILTING THE PANS UPWARD.
MAKE SURE CLEAR TUBING ATTACHED TO DRIP PAN IS ANGLED DOWN-
WARD. THE TUBING SHOULD ALSO BE CUT TO LENGTH AFTER SETTING
UP THE UNIT.
CLEAN THE DRIP PAN OUTSPOUT
RESIN WHEELS BLEED COLOR
THIS IS NOT A PROBLEM. IT IS NORMAL FOR THE PIGMENT ON THE
WHEELS TO COME OFF WITH USAGE. IT WILL NOT DAMAGE YOUR
STONES.
MOTOR MAKES A HIGH PITCH SOUND
THIS IS TYPICALLY DUE TO THE TABLE OR PLATFORM THAT THE CABKING-
6V3 IS PLACED ON. THE BASEBOARD OF THE CABKING-6V3 CAN SOME-
TIMES VIBRATE THE PLATFORM, WHICH ACTS AS AN AMPLIFIER OF THE
MOTOR SOUND. THE BEST SOLUTION IS TO FIND A SURFACE THAT AB-
SORBS THE VIBRATION. YOU CAN ALSO PLACE SOME CARDBOARD OR
CLOTH UNDER THE MACHINE TO ABSORB THE VIBRATION.
TURN WATER CONTROL KNOB SO IT WON’T TURN ANYMORE