33
i) Installing the Receiver
The receiver (1) is attached in the fuselage with servo tape. The aerial cable of
the receiver (2) must be led to and through the vent hole.
j) Installing the Wings for Flight Operation
Before using the model plane, always secure the wings with two screws to
ensure that they cannot come off. Do not overtighten the screws.
Make sure that the wing is aligned correctly and without gaps.
Attach the wing braces (1) to the underside of the wing with two screws (2).
Reinforced wooden blocks are integrated here to ensure durable attachment.
Figure 23
Figure 24
Figure 25
Figure 26
Screw in the holding hooks (1) for the braces (2) to the side of the fuselage and
hook the braces into them.
