Reechcraft PowerMAST Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 56

Reechcraft PowerMAST Скачать руководство пользователя страница 3

reechcraft.com/powermast 888-600-6160

3

INDICATES A POTENTIALLY HAZARDOUS SITUATION THAT, IF NOT AVOIDED, MAY
RESULT IN MINOR OR MODERATE INJURY. IT MAY ALSO ALERT AGAINST UNSAFE
PRACTICES. THIS DECAL WILL HAVE A YELLOW BACKGROUND.

THIS PRODUCT MUST COMPLY WITH ALL SAFETY-RELATED BULLETINS.
CONTACT REECHCRAFT, INC. OR THE LOCAL AUTHORIZED REECHCRAFT
REPRESENTATIVE FOR INFORMATION REGARDING SAFETY-RELATED BULLETINS
THAT MAY HAVE BEEN ISSUED FOR THIS PRODUCT.

REECHCRAFT, INC. SENDS SAFETY-RELATED BULLETINS TO THE OWNER ON RECORD
OF THIS MACHINE. CONTACT REECHCRAFT TO ENSURE THAT THE CURRENT OWNER
RECORDS ARE UPDATED AND ACCURATE.

REECHCRAFT MUST BE NOTIFIED IMMEDIATELY IN ALL INSTANCES WHERE OUR
PRODUCTS HAVE BEEN INVOLVED IN AN ACCIDENT INVOLVING BODILY INJURY OR
DEATH OF PERSONNEL, OR WHERE SUBSTANTIAL PERSONAL PROPERTY DAMAGE
OR DAMAGE TO THE REECHCRAFT PRODUCT HAS OCCURRED.

Contact Us Regarding:

•  Accident Reporting
•  Product Safety Publications
•  Current Owner Updates
•  Product Safety Questions
•  Standards and Regulations Compliance Information
•  Questions Regarding Special Applications
•  Questions Regarding Product Modifications

Contact Information:
Technical Safety and Engineering Department

845 34th St S, Fargo, ND 58102
[email protected]

In USA

: 888-600-6160

Outside USA

: 701-280-5900

«
1
2
3
4
5
...
»

Содержание PowerMAST

























































Отзывы:

Нет отзывов