manualshive.com logo in svg

Reechcraft PowerMAST, Руководство по безопасности оператора, Страница: 2 / 56

Поделиться
Скачать
Reechcraft PowerMAST Скачать руководство пользователя страница 2

PowerMast by ReechCraft

2

reechcraft.com/powermast

© 2022 by ReechCraft, Inc. All rights reserved

This manual may not be reproduced, photocopied, copied, duplicated, or translated 
without prior written consent from ReechCraft, Inc.

This ReechCraft, Inc. product is patented and protected in the United States US Patent 
6981573. All other US and International Patents Pending.

Using this product in methods not intended by ReechCraft, Inc. are strictly prohibited 
without prior written permission from ReechCraft, Inc.

Product General Information: 

Model – PowerMast

This is the Safety Alert Symbol. It is used on the machine to alert you to potential personal 
injury hazards. Understand and obey all safety messages that correspond with this symbol to 
avoid possible injury or death.

INDICATES AN IMMINENTLY HAZARDOUS SITUATION THAT, IF NOT AVOIDED, 
WILL RESULT IN SERIOUS INJURY OR DEATH. THIS DECAL WILL HAVE A RED 
BACKGROUND.

INDICATES A POTENTIALLY HAZARDOUS SITUATION THAT, IF NOT AVOIDED, COULD 
RESULT IN SERIOUS INJURY OR DEATH. THIS DECAL WILL HAVE AN ORANGE 
BACKGROUND.

SAFETY ALERT SYMBOLS 

AND

 SAFETY SIGNAL WORDS

Содержание PowerMAST

























































Отзывы:

Нет отзывов