X2 COMBAT Install Guide 2.0
17
2.6 Primary network connection
RJ45 SOCKET
The socket is a typical Ethernet 10/100BASE-T type, for connection of a Cat 5e cable, wired
to the T568A or T568B scheme. The typical wire colours noted below are of the T568B
scheme.
The camera supports automatic polarity and automatic crossover (Auto MDI/MDIX) to
simplify installation cabling.
Due to the multiple interconnections required for the PTZ unit and power supply, the maximum
specified cable run from the PSU to network hub or switch is
50m
. For runs above this, the camera
must be switched to
10Mb/s
link-speed. This can be done in the
PTZ Parameter
configuration page.
The use of high quality, solid-copper Ethernet cable is highly recommended for reliable operation.
Ensure that any Ethernet cable has a comfortable arc-radius when inside the PSU box.
RJ45 connector wiring
PIN No.
PCB IDENT
WIRE COLOUR
1
TxP
White / Orange
2
TxN
Orange
3
RxP
White / Green
4
-
Blue
5
-
White / Blue
6
RxN
Green
7
-
White / Brown
8
-
Brown
