Redsail CM-Series, Руководство пользователя

Страница: 31 / 33

Attention:：
1 Cleaning guide: please prepare the dry cotton, lubricating oil.
2 Cleaning of the linear guide: Firstly, move the laser head to the right side (or left side),
wipe with a dry cloth until it is shiny cleaned, plus with a little lubricating oil, push the laser
head slowly several times, let the lubricating oil scatter uniformly.
7.2.5 Tighten screws, the coupler
After working a period of time, the screws and Coupling of the moving joint will loose, it
will affect the stability of the mechanical movement, therefore, should observe if the
driving components have strange sound or abnormal phenomena when the machine
runnning, to strong and maintain in time if find any problems. While the machine is
running for some time, should reinforced the screws one by one with a tool. The first
reinforcement should be done after the device running about one month.
7.2.6 Optical inspection
The optical systemfor Laser Engraving is completed by mirror’s reflection and
Lens’ focus, focus lens will not have the offset problem in the laser path , But the three
mirrors is fixed by the mechanical parts, more likely to make the offset, so recommend
the user need to check the laser path before working every time to ensure it is normal.
7.3 Equipment Notes
7.3.1 Fill the water before turnning on the machine, we should observe the circulation of
the water at any time during the machine working, to ensure that the circulating water is
normal, and protect the normal working for laser tube.