Redsail CM-Series, Руководство пользователя

Страница: 22 / 33

1 · Emergency stop switch: Control the power on/off for the main part, such as switch
power supply, laser power supply and so on.
2·Main power switch: Control the main power on/off.
3·Control system panel(refer control system instrument for more information).
Chapter 4 Adjustment of Optical Path
After connecting all accessories of the machine, please switch on the power of water
cooler (in front of water cooler), when the water inside the laser tube
circulate normally, then please switch on the machine(including Leakage
protector，Emergency switch and General supply switch)
Optical path adjustment:
Adjusting laser beam is the important step in use. After finishing of the adjusting
for optical path, you can engrave and cut sample. Optical path adjustment
directly affects the quality of engraving and cuttin. Now just make the explaination for one
of optical path.
1
2
3