Redsail CM-Series, Руководство пользователя

Страница: 25 / 33

(Y-axis direction) and the height of the laser tube, to make sure the spots are within the
hole of laser head (center is better). Below Figure:
is better).
1·The thrid reflecting Mirror holder 2·The second reflecting mirror holder
The fifth Step: Optical path adjustment between the third reflecting mirror and the
focus lens.
Paste the test paper under the laser head, and press "Pulse/Run" key, to check whether
the spot is in the center of the test paper. If in the center, optical path is correct; if not,
need move the location of laser head (there is three screws on the laser head, you can
adjust laser head’s location with these three screws) to adjust the optical path and let the
spot is in the center. Below Figure
Figure 1
2