Redsail CM-Series, Руководство пользователя

Страница: 30 / 33

cleaning along with center to the edge of the lens carefully. No.3 mirror and focus lens
need to be taken off from the holder, clean them with the same way, Please put it back
after cleaning.
Attention:：
(1)Should wipe the mirrors and lens slightly, dont make any damage for the coating
surface.
(2) Cleaning process should be done carefully to avoid falling.
(3) When installing the focus lens, be sure to keep convex surface downward .
7.2.4 The cleaning of guide way（Recommend cleaning once every two weeks . Do it
under shutdown condition）
Guide, linear axis as one of the core components of equipment, its function is to play the
role of guidance and supporting. In order to ensure the machine has high precision,
requiring that their guide, linear guide with high precision and good stability of the
movement. During operation, due to in the processing the working materials will have a lot
of corrosive dust and smoking, these large quantities of smoking and dust will deposit in
the rails, surface of linear axis, not only great influence for the precision of the
equipment , but also the rail line shaft surface will form corrosion point, shorten the
equipment’s life. To make the machine working normally and stably, ensure the
processing quality, Routine maintenance work for the guide and linear axis should be
done carefully.