Redsail CM-Series, Руководство пользователя

Страница: 16 / 33

Chapter 3 Machine Installation and Directions
3.1 Laser Tube Installation
1·Mirror Holder 2·Water outlet 3Cathode- 4·Water in 5·Anode+ 6·Tube holder 7·Laser out
Please refer to the above Figure when you install the laser tube. According to Figure,
solder the anode wire (pink /thick line), the cathode wire (black/ blue line) in the correct
location of laser tube.(While soldering, please don’t keep the electric soldering iron
touching the welding point in so long a time in case it burn out the laser tube), poor
soldering is not allowed. After finish soldering, please package the welding point with high
voltage tape.Especially the anode wire must be isolated from the metal parts, otherwise
will appear leakage of electricity and damage the laser tube.
After soldering, connect the in/out water pipe with the entrance/exit on the laser
machine (The connection of laser tube must comply with the principle water come in from
the anode and out from the cathode).