wXa-203, wXa-213, wXa-223
Optimizer
v2.2.1
58
9.2.
GSM
The GSM feature is offered for your convenience, but we are not able to support it. The
information provided here is general in nature but may not be sufficient to establish a
GSM connection. If you run into any difficulties, you must contact your GSM network
provider for support.
If you have a GSM-based cellular phone, it may be possible to use the GSM network,
when available, for XGate and XWeb data over the Optimizer. You will get the benefits
of compression and a faster data transfer rate than over a satellite phone which typically
equates to cost savings.
Only GSM-based service is supported. LTE-based and CDMA-based service is NOT
supported. If you are unsure of which service you have, contact your cellular provider
before attempting to configure for GSM connection.
9.2.1.
GSM Configuration in Optimizer
With the Halo powered Before you can configure the Optimizer for GSM, you must:
•
Obtain a USB data dongle from your cellular provider. Your provider may also
require you to purchase a data plan.
•
Activate the USB data dongle with your cellular carrier and test it to make sure it
works. Typically, testing requires only that you plug the USB Data Dongle into
your computer and see if you can get on the Internet. If testing fails, contact your
cellular carrier for support.
•
Contact your cellular provider to obtain the information required to connect to
their GSM network. The information may include:
o
Access Point Name (APN).
o
Username required for access to the APN.
o
Password required for access to the APN.
To configure the Optimizer for GSM service.
Login to the Optimizer and go to: Network > PPP > Settings > GSM.
