Redline RDL-3000 SC Скачать руководство пользователя страница 83

Страница: 83 / 142

RDL-3000

User Manual

70-00158-01-DRAFT

Page

of 142

November 25, 2010

4.6.6

Subscriber Service Status

Services status and configuration screens can not be displayed directly; the operator
must first select a Subscriber Link or Service Group, and then choose the Service from
the list. Refer to the following screens:

4.4.5: Subscriber Services Summary Screen (SS Only) on page 53

4.6.1: Subscriber Links on page 74

4.6.3: Service Groups on page 79

This screen displays status and statistics information for a Service. Click to expand or

to hide fields.

Fig. 54

Web - Service Status Screen

General

Service Name

: Operator-assigned name for this Service.

Service ID

: A unique numeric ID generated automatically when the Service was created.

This value is required when using the CLI interface to modify Service settings.

Ethernet Packets

Packets

Discarded

: Total number of packets discarded by the local system due to errors.

: Received wireless packets discarded.

: Transmitted wireless packets discarded by remote end unit.

Packets Transmitted:

Total packets successfully processed over the wireless interface.

Total does not include discarded or errored packets.

: Total received wireless packets.

: Total transmitted wireless packets.

Packets Received:

Total packets successfully processed over the wireless interface.

Total

does not include discarded or errored packets.

: Total received wireless packets.

: Total transmitted wireless packets.

Controls

Reset

: Click to zero all displayed statistics counters.

Refresh

: Click to update displayed statistics counters.

Содержание RDL-3000 SC















































































































































Результаты поиска

Содержание RDL-3000 SC

Отзывы:

Бренды по названию

Популярные бренды

Redline RDL-3000 SC, Руководство пользователя

Результаты поиска

Содержание RDL-3000 SC

Отзывы:

Бренды по названию

Популярные бренды