Redline RDL-3000 SC Скачать руководство пользователя страница 49

Страница: 49 / 142

RDL-3000

User Manual

70-00158-01-DRAFT

Page

of 142

November 25, 2010

Wireless Summary

Subscriber Links

: Status of the wireless links to subscribers.

Configured

: Number of provisioned Subscriber Links.

Active

: Number of subscribers that are online (registered with sector controller).

Subscriber Services

: (Subscriber only) Status of the Subscriber Services for this

subscriber.

Configured

: Number of provisioned Services.

Fig. 30

Web - SS System Status Screen

Services

: Status of the Services for all subscribers.

Configured

: (SC only) Number of provisioned Services.

Active

: Number of active Services (subscriber are active).

Wireless Ethernet Statistics

Buffered Packets

Number of packets successfully processed over the wireless interface,

excluding discarded and errored packets.

: Received wireless packets.

: Transmitted wireless packets.

Discarded Packets

: Number of packets discarded by the local unit.

: Received wireless packets discarded (buffer overflow).

: Transmitted wireless packets discarded by the local unit due to errors (e.g., buffer

overflow, or unacknowledged by remote end unit).

Lost Packets

Total number of packets containing errors (e.g., CRC).

: Received wireless packets with errors.

: Transmitted wireless packets with errors detected by remote end unit.

Ethernet Port Statistics

Buffered Packets

Packets processed through the Ethernet port. Total does not include

discarded or errored packets.

: Number of ingress packets received on the Ethernet port.

: Number or egress packets transmitted on the Ethernet port.

Discarded Packets

: Total number of packets discarded due to buffer overflow.

: Received packets discarded due to errors (e.g., CRC or buffer overflow).

Содержание RDL-3000 SC















































































































































Результаты поиска

Содержание RDL-3000 SC

Отзывы:

Бренды по названию

Популярные бренды

Redline RDL-3000 SC, Руководство пользователя

Результаты поиска

Содержание RDL-3000 SC

Отзывы:

Бренды по названию

Популярные бренды