Redline RDL-3000 SC Скачать руководство пользователя страница 53

Страница: 53 / 142

RDL-3000

User Manual

70-00158-01-DRAFT

Page

of 142

November 25, 2010

4.4.5

Subscriber Services Summary Screen (SS Only)

Click

Services Summary

in the main menu (SS) to view the status of all Services on

this subscriber. This screen is available only on the subscriber unit.

Fig. 33

Web - Services Summary Screen

Name

: Operator-assigned name for Service.

ID/Status

: Service identifier and status indicator.

: A unique numeric ID generated automatically when the Service was created. This

value is required when using the CLI interface to modify Services settings.

Status

: Graphic indication of the status of this link or Service.

The link or Service is available.

The Link or Service is unavailable (offline or disabled).

Click the status to display the

Subscriber Service Status

screen.

Discarded Packets

: Total number of packets discarded by the local system due to errors.

: Received wireless packets discarded.

: Transmitted wireless packets discarded by remote end unit.

Tx Packets:

Total packets successfully transmitted over the wireless interface. Total does

not include discarded or errored packets.

: Total packets sector controller has reported transmitting to this subscriber.

: Total packets subscriber has transmitted to sector controller.

Rx Packets

Total packets successfully received over the wireless interface. Total does not

include discarded or errored packets.

: Total packets subscriber has received from sector controller.

: Total packets sector controller has reported receiving from subscriber.

Содержание RDL-3000 SC















































































































































Результаты поиска

Содержание RDL-3000 SC

Отзывы:

Бренды по названию

Популярные бренды

Redline RDL-3000 SC, Руководство пользователя

Результаты поиска

Содержание RDL-3000 SC

Отзывы:

Бренды по названию

Популярные бренды