Redline Communications RedMAX, Руководство пользователя, Страница: 49 / 55

Red MAX
™
Subscriber Modem
SU-O User Manual
70-00057-01-01-DRAFT
Proprietary Redline Communications © 2007
September 7, 2007
Page 49 of 55
Table 26 : Troubleshooting - Event Log Messages
Log Message Description
DSC abort by DSC-ACK
[SF Id: XXXX]
A DSC transaction has been aborted due to an
acknowledgement message not being received by the
subscriber.
DSC Err - DSC-ACK
send retries exhausts [SF
Id: XXXX]
subscriber has attempted to acknowledge a DSC
transaction unsuccessfully more than the maximum
number of times.
DSC Err - DSC-RSP
send retries exhausts [SF
Id: XXXX]
subscriber has attempted to acknowledge a DSC-RSP
transaction message unsuccessfully more than the
maximum number of times.
DSC Err - SF or CLS
rejected [SF Id: XXXX]
DSC transaction has been rejected by base station.
DSC Success [SF Id:
XXXX]
DSC transaction has been successful.
DSC-DSD Reject - SF ID
not found
base station has requested the deletion of a SFID which
does not exist.
DSD Success [SF Id:
XXXX]
DSD transaction has successfully completed.
DSx Action [error]
There has been an error in the creation of a service flow.
The particular failure is detailed in the message text.
DSx Add Reject [reason]
This message signifies that the addition of a service flow
has been rejected by the subscriber. The reason for the
failure is included in the message text.
Failed to acquire the
time-of-day
Communication with a ToD (RFC-868) server has not
been successful. The correct time of day has not been
acquired. According to standard, the subscriber must now
perform a MAC reboot and begin network entry again.
Initial Ranging at
Maximum Power [Adj.:
+nn]
subscriber has begun initial ranging with a base station,
and has reached its maximum Tx power while attempting
to establish communication.
Initial Ranging at
Minimum Power [Adj.:
+nn]
subscriber has begun initial ranging with a base station,
and has reached its minimum Tx power while attempting
to establish communication.
Initial Ranging Backoff A contention was encountered with another subscriber
while attempting to perform initial ranging. The subscriber
will wait and try again after the backoff interval.
Initial Ranging
Parameters Adjusted
[TLV Map: XXXXXXX]
This message displays the parameter adjustments as
requested by the base station.
Initial Ranging Success
[TLV Map: XXXXXXX]
Initial ranging has been completed successfully.
Invalid MAC address This message is displayed when the MAC of the
subscriber does not belong the Redline. The system will
not function in this state.
Large Time Adjustment
Received
An excessively large timing correction has been sent by
the base station. This correction has not been applied,
though it has been acknowledged.