manualshive.com logo in svg

Redline Communications RedMAX, Руководство пользователя, Страница: 30 / 55

Поделиться
Скачать
Redline Communications RedMAX Скачать руководство пользователя страница 30

 

 

 Red

MAX

™

 

Subscriber Modem

 

SU-O  User Manual

 

 

70-00057-01-01-DRAFT 

Proprietary Redline Communications © 2007

 September 

7, 

2007 

Page 30 of 55

 

 

4.3.2  bsIdTable - Base Station ID Table Commands 

The bsIdTable includes the MAC addresses of up to sixteen base stations. The subscriber 
is authorized to register with any base station listed in this table. The count value 
indicates the number of valid entries in the table (beginning at ID0). 

When the subscriber is performing a frequency scan, the scan will be stopped 
immediately if any base station listed in the bsIdTable is detected. If subscriber is 
attempting to re-register, selection priority is based on table position (ID0 is highest).

 

Table 9: CLI - bsIdTable - Base Station ID Commands 

Command  Description 

add

 

Add or modify a base station ID entry. The count value will be adjusted to 

reflect the current number of effective entries. If the table position value is 
not specified, the entry will be made following the last valid entry. 

BsId

: The new entry of BsId value 

EntryNumber

: The entry position in the table. 

Example: Enter the following command string to register a base station ID 

in table position #7: 

 add 

00:09:02:00:a3:5d

 [Enter]

 

delete

 

Delete a base station ID entry. The count value will be adjusted to reflect 

the current number of effective entries. If the table position value is not 
specified, the last valid entry in the table is deleted.

 

EntryNumber

: The entry position in the table. 

show

 

Display the base station ID table entries. If the table position value is not 

specified, all entries in the table are displayed. If the keyword 'monitor' is 
used, the display is updated continually. 

EntryNumber

: The entry position in the table. 

Monitor

: Dynamically updated display of table values.  

 

Notes: 

1.  The detected BS table is automatically reset at the first restart after either the 

frequency range table, the BS ID table or the bandwidth is modified.  

2.  New “Detected BS table reset” log message generated when any of the modifications 

described above occur.  

3.  New “Add detected BS…” log message added any time a new BS is added to the 

table during the initial scan process. 

 

 

Содержание RedMAX
























































Отзывы:

Нет отзывов