Redline Communications RedMAX Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 55

Redline Communications RedMAX Скачать руководство пользователя страница 42

Red

MAX

™

Subscriber Modem

SU-O User Manual

70-00057-01-01-DRAFT

Proprietary Redline Communications © 2007

September

7,

2007

Page 42 of 55

4.3.14 set - Set Commands

The set mode can be used to directly modify all available subscriber parameters. The
parameters listed in this table do not have a separate mode, and can openly be modified
by the set command.

Enter a new value for one or more fields in mode.

set [Enter]

Display all fields.

Modify selected field(s).

set [mode] [field] [value] [value] [field] […] <ENTER>

Table 20: CLI - set - Modify Subscriber Parameters

Command

Description

dhcpRelayAgent

Use this setting to enable or disable the DHCP relay setting.

0 -- Disable DHCP relay agent.

1 -- Enable DHCP relay agent.

This feature must be enabled to use DHCP Option 82.

dlLearnFilter

Use this setting to enable or disable the DHCP relay setting.

0 -- Disable filter - Do not filter DL packets.

1 -- Enable filter - Only forward DL packets based on learned hosts.

ethernet

Use this setting to modify the Ethernet port auto negotiation, link speed,

and duplex settings.

AutoNegEnabled

<value>

0 -- Disabled

1 -- Enabled.

LinkSpeed

<value>

0 -- 10M

1 -- 100M.

LinkDuplex

<value>

0 -- Half

1 -- Full.

managedSS

The managedSS command allows you to configure the subscriber for

independent operation, or enable management using the RedMAX EMS
system. The managedSS parameter is controlled from root mode. The
following table lists all commands available for managedSS.

0 - Disable remote management

1 - Enable remote management

pppoe

Enable/Disable DSL Forum VSA in PPPoE Vendor-Specific Tag

(RFC4679).

0 - Disable pppoe

1 - Enable pppoe

sysContact

Enter device administration contact information (255 chars max.).

sysLocation

Enter the device location (255 characters max.).

sysName

Enter the device name (255 characters max.).

«
...
40
41
42
43
44
...
»

Содержание RedMAX
























































Отзывы:

Нет отзывов