manualshive.com logo in svg

Redline Communications RedMAX, Руководство пользователя, Страница: 19 / 55

Поделиться
Скачать
Redline Communications RedMAX Скачать руководство пользователя страница 19

 

 

 Red

MAX

™

 

Subscriber Modem

 

SU-O  User Manual

 

 

70-00057-01-01-DRAFT 

Proprietary Redline Communications © 2007

 September 

7, 

2007 

Page 19 of 55

 

Real-Time Polling Service (rt-PS) 

The base station schedules a continuous regular series of transmit opportunities for the 
subscriber to send variable size data packets. The grant size is based on the current data 
transfer requirement. Typical applications include streaming MPEG video or VOIP with 
silence suppression. This is efficient for applications that have a real-time component and 
continuously changing bandwidth requirements. 

Non-Real-Time Polling Service (nrt-PS) 

The base station schedules regular transmit opportunities for the subscriber to send 
variable size data packets. Typical applications may include high bandwidth FTP. The 
polling period may typically be one second or less, even during periods of network 
congestion.  

Best Effort (BE) 

The base station schedules transmit opportunities for the subscriber to send traffic based 
on unused bandwidth after all higher level traffic scheduling requirements are serviced. 
Typical applications may include Internet access and email. Best effort service flows can 
be assigned a priority of 0 to 7. 

Unsolicited Grant Service (UGS) 

The base station schedules a continuous series of transmit opportunities for the subscriber 
to send fixed size data packets. This schedule supports real-time applications including 
VoIP or TDM transport. The UGS pre-scheduled grants guarantee reserved bandwidth 
and reduce latency introduced by repetitive grant requests. The service flow will not 
transmit packets larger than nominal grant interval. 

2.3.4  Downlink Service Flow Scheduling 

The base station schedules downlink traffic on active service flows based on the 
minimum reserved data rate (CIR), traffic priority, and maximum latency. 

 

 

 

Содержание RedMAX
























































Отзывы:

Нет отзывов