Redline Communications RedMAX Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 55

Redline Communications RedMAX Скачать руководство пользователя страница 10

Red

MAX

™

Subscriber Modem

SU-O User Manual

70-00057-01-01-DRAFT

Proprietary Redline Communications © 2007

September

7,

2007

Page 10 of 55

1.7 Frequency

Selection

1.7.1 General

Operation in the FWA band is subject to license. The radio power and channel frequency
selections must be set correctly before the installed system is allowed to transmit. The
installed system must comply with all governing local, regional, and national regulations.
Contact authorities in the country of installation for complete information regarding the
licensing regime and operating restrictions for that regulatory domain.

1.7.2 R&TTE Directive 1999/5/EC Statements

Installation

The transceiver and antenna equipment must be installed by a qualified professional
installer and must be installed in compliance with regional, national, and local
regulations. It is the responsibility of the system installer and/or system operator to ensure
the installed system does not exceed any operational constraints identified by local
regulations. Refer to the sections in this product User Guide for detailed information about the
correct installation steps to ensure power and frequency settings are set correctly before
connecting the antenna. Operation in the 3.4-3.6 GHz band is subject to license. Authorities
within the country of installation can provide information regarding the licensing regime and
restrictions.

Community Language Declarations

The following table contains community language versions of informal statement in
accordance with Article 6.3 of Directive 1999/5/EC.

Table 1

:

R&TTE - Community Language CE Declarations

Community language versions of informal statement for inclusion in user

information in accordance with Article 6.3 of Directive 1999/5/EC

Danish

Undertegnede Redline Communications erklærer herved, at følgende

udstyr subscriber overholder de væsentlige krav og øvrige relevante
krav i direktiv 1999/5/EF

Hierbij verklaart Redline Communications dat het toestel subscriber in

overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG

Dutch

Bij deze verklaart Redline Communications dat deze subscriber voldoet

aan de essentiële eisen en aan de overige relevante bepalingen van
Richtlijn 1999/5/EC.

English

Hereby, Redline Communications, declares that this subscriber is in

compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.

Finnish

Redline Communications vakuuttaa täten että subscriber tyyppinen laite

on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.

Par la présente Redline Communications déclare que l'appareil

subscriber est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE

French

Par la présente, Redline Communications déclare que ce subscriber est

conforme aux exigences essentielles et aux autres dispositions de la
directive 1999/5/CE qui lui sont applicables

«
...
8
9
10
11
12
...
»

Содержание RedMAX
























































Отзывы:

Нет отзывов