&
User
AN-80i
Manual
70-00072-01-07
Proprietary Redline Communications © 2010
Page 72 of 106
Sept 18, 2008
5.3.9
Logout
Use the
logout
command to terminate the current Telnet session.
Table 29: CLI - logout
PTP
PMP
Parameter/Description
√
new
Terminate the current Telnet session.
5.3.10
New
Use the
new
command to create a new link, group, or connector ID.
Table 30: CLI - new
PTP
PMP
Parameter/Description
√
new
<id_type>
- [link | group | conn]
<id>
- <id number>
5.3.11
Ping
Use the
ping
command to initiate an ICMP ping command from the AN-80i.
Table 31: CLI - ping
PTP
PMP
Parameter/Description
√
ping
<address>
- Target IP address
<count>
- Number of ICMP packets to send [1..16].
5.3.12
Reboot
Use the
reboot
command to reboot the AN-80i.
Table 32: CLI - reboot
PTP
PMP
Parameter/Description
√
√
reboot
<seconds> Time to reboot the AN-80i.
<seconds>
Time in seconds (0 cancels previous reboot command).
5.3.13
Reset
Use the
reset
command to set all AN-80i statistics values to zero.
Table 33: CLI - reset
PTP
PMP
Parameter/Description
√
√
stats: Reset the AN-80i statistics counters.
reset stats <Enter>