&
User
AN-80i
Manual
70-00072-01-07
Proprietary Redline Communications © 2010
Page 68 of 106
Sept 18, 2008
5.3.2
Clear
Use the
clear
command to delete all IDs from an ID table.
Table 22: CLI - clear
PTP
PMP
Parameter/Description
√
Enter this command to delete all IDs from an ID table.
clear <idtable>
idtable
- Clear all the IDs
5.3.3
Del
Use the
del
command to delete a specific ID or security key/certificate.
Table 23: CLI - del
PTP
PMP
Parameter/Description
√
del <id>
Remove a group, connection, or link id.
id number
<integer>
Unique number for group, connection, or link.
√
Del <file>
file <name> <mode>
Remove a file from flash and runtime memory.
<name>
File name on server. File name must be one of the
following:
dsa_key_<mac>.pem
DSA key used for SSH.
rsa_key_<mac>.pem
RSA Key used for SSH.
ssl_cert_<mac>.pem
SSL Certificate.
ssl_key_<mac>.pem
SSL Key.
usr_wcert_<mac>.der*
User wireless certificate.
usr_wkey_<mac>.der*
User wireless key.
usr_wacert_<mac>.der*
User
wireless
authority
certificate
The <mac> portion is the MAC address of the board.
For example: dsa_key_00-09-02-00-01-02.pem
<mode>
Can be 'usr' or 'factory'. Defaults to 'usr' if mode is not
specified.
*Not used in v3.00 software release.
5.3.4
Enable
Use the
enable
command to re-enable a specific ID (that was disabled).
Table 24: CLI - enable
PTP
PMP
Parameter/Description
√
enable
<id>
- [id number]