Redline Communications AN80IE, Руководство пользователя

Страница: 82 / 106

&
User
AN-80i
Manual
70-00072-01-07 Proprietary Redline Communications © 2010 Page 82 of 106 Sept 18, 2008
5.3.18 Snmpcommunity
Use the snmpcommunity command to configure SNMP community permissions.
Table 38: CLI - snmpcommunity
PTP PMP Description
√ √
add : add a new snmp community to the snmp community table. The
index value is assigned automatically. Up to eight community entries can
be entered in the table.
snmpcommunity add <name> <string> <Enter>
snmpcommunity add <rights> 0 | r | w | rw <Enter>
Where.
0 (zero):Deny read and write permission.
r : Grant read access permission only. Deny write permission.
w : Grant write access permission only. Deny read permission.
rw : Grant read and write access permission for this community.
default : Set all snmp parameters to factory default settings.
snmpcommunity default <idx> <Enter>
del : Delete the specified community entry.
snmpcommunity del <idx> <Enter>
print : List all SNMP communities and associated permissions.
snmpcommunity print <Enter>
5.3.19 Snmptrap
Use the snmptrap command to configure the SNMP trap message reporting.
Table 39: CLI - snmptrap
PTP PMP Description
√ √
add : add a new snmp trap to the snmp trap table. The index value is assigned
automatically. Up to eight settings can be entered.
snmptrap add <ipaddr> <port> <community> <Enter>
change : Modify the specified snmp setting.
snmptrap change <idx> [-p <port>] [-i <ip_add>] [-c <community] <Ent>
del : Delete the specified snmp setting.
snmptrap del <idx> <Enter>
print : List all SNMP trap settings.
snmptrap print <Enter>
5.3.20 Test
Use the test command to load the current edited (but not permanently saved)
configuration settings.
Table 40: CLI - test
PTP PMP Parameter/Description
√ √
config - AN-80i configuration settings
test config <Enter>