Redemac Autolabel D43, Руководство пользователя

Страница: 2 / 38

Table of Contents
1 Introduction
2 Installation
2.1 Unpacking and Assembling the Machine
2.1.1 Assembling the Machine
2.1.2 Connecting Cables
2.1.3 Connecting the Touch Screen
2.1.4 Setting the Label Paper Width
2.1.5 Removing and Loading Thermal Transfer Ribbon
T43 & T63 models only
2.1.6 Removing and Loading Rolls of Label Paper
2.2 Test Print and Apply
2.3 Updating Articles and Label Layouts
2.4 Machine Settings ”Settings”
2.4.1 System Password
2.4.2 Settings->Overview
2.4.3 Settings->Printer
2.4.4 Settings->Timing
2.4.4.1 ”Conveyor speed”
2.4.4.2 ”Window start”
2.4.4.3 ”Window length”
2.4.4.4 ”Apply delay”
2.4.4.5 ”Trig block time”
2.4.4.6 ”Blow delay”
2.4.5 Settings->Adjust
2.4.5.1 ”Print speed ”
2.4.5.2 ”Print contrast”
2.4.5.3 ”Label width ”
2.4.5.4 ”Label length (mm)”
2.4.5.5 ”Print offset ”
2.4.5.6 ”Fan speed”
2.4.5.7 ”Blow time”
2.4.5.8 ”Trig type”
2.4.5.9 ”Trig polarity”
2.4.5.10 ”Scale type”
2.4.5.11 ”Righter time”
2.4.5.12 ”Apply test prints”
2.4.5.13 ”Check max weigh”
2.4.5.14 ”Check min weigh”
2.4.5.15 ”Render side position”
2.4.5.16 ”Render top position”
2.4.6 ”Settings->Network”
2.5 Installation at the Production Line
2.5.1 Planning the System Installation
2.5.2 Selecting and Placing the Trig Sensor
3 Daily Operation
3.1 Changing Labels and ribbon
2
www.redemac.com 888-335-9570